Hello! How to connect the el. Call if the power to take from the outlet?
There are 2 answers
Answered on March 24, 2015 15:15
Hello! An electronic doorbell refers to a wired one, and they are connected using the following algorithm (if the bell is low voltage): 1. Turn off the power. 2. From the junction box, the cable is laid to the bell button and the bell itself. In the junction box, using the indicator, you must find the supply wires and determine the phase and zero. Then everything must be connected according to the wiring diagram. 3. In the door frame or wall is drilled hole for the withdrawal of wire button. 4. The wire is connected to the terminals of the button, after which it is attached to the wall above the hole. 5. The second end of the wire is connected to two terminals located on the bell battery. If the battery of the bell is not in the device case, but separately from it, it is necessary to stretch the wire from the button to the bell, separate the two-core cable and connect each of the wires to a separate terminal. If there is a transformer in the bell case, it is necessary to connect it to the junction box and two of the three terminals corresponding to the voltage. 6. After you have connected your doorbell, turn on the power and check its operation.